Qt's signals and slots mechanism ensures that if you connect a signal to a slot, the slot will be called with the signal's parameters at the right time. Signals and slots can take any number of arguments of any type. They are completely type safe. @jsulm said in How to find sender in slot?: @cerr This is the answer: 'This class was mostly useful before lambda functions could be used as slots.' :-) Yup, I've figured this out by now as well. I'm still new to Lambda and am learning as I go.! Use lambda functions as you already do. 'I need to diustinguish them by grp' - what is grp? Qt Slot Sender, petit casino bayonne rue maubec, fun online slots for free, cost to enter valley forge casino. Connect Qt QML and C Overview. This program demonstrates how QML and C can be connected through Qt signals and slots. It does this through embedding C code as a context property in QML rather than explicitly connecting signals and slots. When the program is started, the C part send a signal to QML, including a parameter. Qt Signal Slot Sender, sunland casino, casino lac leamy eagles, shamrock poker room.

• Qt Slot Get Sender
• Qt Slot Sender Cast
• Qt Signal Macro
• Qt Signal Sender
• Qt Signal And Slots

EnArBgDeElEsFaFiFrHiHuItJaKnKoMsNlPlPtRuSqThTrUkZh

This page was used to describe the new signal and slot syntax during its development. The feature is now released with Qt 5.

• Differences between String-Based and Functor-Based Connections (Official documentation)
• Introduction (Woboq blog)
• Implementation Details (Woboq blog)

Note: This is in addition to the old string-based syntax which remains valid.

• 1Connecting in Qt 5
• 2Disconnecting in Qt 5
• 4Error reporting
• 5Open questions

Connecting in Qt 5

There are several ways to connect a signal in Qt 5.

Old syntax

Qt 5 continues to support the old string-based syntax for connecting signals and slots defined in a QObject or any class that inherits from QObject (including QWidget)

New: connecting to QObject member

Here's Qt 5's new way to connect two QObjects and pass non-string objects:

Pros

• Compile time check of the existence of the signals and slot, of the types, or if the Q_OBJECT is missing.
• Argument can be by typedefs or with different namespace specifier, and it works.
• Possibility to automatically cast the types if there is implicit conversion (e.g. from QString to QVariant)
• It is possible to connect to any member function of QObject, not only slots.

Cons

• More complicated syntax? (you need to specify the type of your object)
• Very complicated syntax in cases of overloads? (see below)
• Default arguments in slot is not supported anymore.

New: connecting to simple function

The new syntax can even connect to functions, not just QObjects:

Pros

• Can be used with std::bind:

• Can be used with C++11 lambda expressions:

Cons

• There is no automatic disconnection when the 'receiver' is destroyed because it's a functor with no QObject. However, since 5.2 there is an overload which adds a 'context object'. When that object is destroyed, the connection is broken (the context is also used for the thread affinity: the lambda will be called in the thread of the event loop of the object used as context).

Disconnecting in Qt 5

As you might expect, there are some changes in how connections can be terminated in Qt 5, too.

Old way

You can disconnect in the old way (using SIGNAL, SLOT) but only if

• You connected using the old way, or
• If you want to disconnect all the slots from a given signal using wild card character

Symetric to the function pointer one

Only works if you connected with the symmetric call, with function pointers (Or you can also use 0 for wild card)In particular, does not work with static function, functors or lambda functions.

New way using QMetaObject::Connection

Works in all cases, including lambda functions or functors.

Asynchronous made easier

With C++11 it is possible to keep the code inline

Here's a QDialog without re-entering the eventloop, and keeping the code where it belongs:

Another example using QHttpServer : http://pastebin.com/pfbTMqUm

Error reporting

Tested with GCC.

Fortunately, IDEs like Qt Creator simplifies the function naming

Missing Q_OBJECT in class definition

Type mismatch

Open questions

Default arguments in slot

If you have code like this:

The old method allows you to connect that slot to a signal that does not have arguments.But I cannot know with template code if a function has default arguments or not.So this feature is disabled.

There was an implementation that falls back to the old method if there are more arguments in the slot than in the signal.This however is quite inconsistent, since the old method does not perform type-checking or type conversion. It was removed from the patch that has been merged.

Overload

As you might see in the example above, connecting to QAbstractSocket::error is not really beautiful since error has an overload, and taking the address of an overloaded function requires explicit casting, e.g. a connection that previously was made as follows:

connect(mySpinBox, SIGNAL(valueChanged(int)), mySlider, SLOT(setValue(int));

cannot be simply converted to:

...because QSpinBox has two signals named valueChanged() with different arguments. Instead, the new code needs to be:

Unfortunately, using an explicit cast here allows several types of errors to slip past the compiler. Adding a temporary variable assignment preserves these compile-time checks:

Some macro could help (with C++11 or typeof extensions). A template based solution was introduced in Qt 5.7: qOverload

The best thing is probably to recommend not to overload signals or slots …

… but we have been adding overloads in past minor releases of Qt because taking the address of a function was not a use case we support. But now this would be impossible without breaking the source compatibility.

Disconnect

Should QMetaObject::Connection have a disconnect() function?

The other problem is that there is no automatic disconnection for some object in the closure if we use the syntax that takes a closure.One could add a list of objects in the disconnection, or a new function like QMetaObject::Connection::require

Qt Slot Get Sender

Callbacks

Function such as QHostInfo::lookupHost or QTimer::singleShot or QFileDialog::open take a QObject receiver and char* slot.This does not work for the new method.If one wants to do callback C++ way, one should use std::functionBut we cannot use STL types in our ABI, so a QFunction should be done to copy std::function.In any case, this is irrelevant for QObject connections.

Qt 5 signals and slots mechanism. How signals and slots in Qt differ from the callback architecture in other widget toolkits. A Qt basics tutorial. How to add signals and slots in Qt Creator.

Part 9 of the Qt Creator C++ Tutorial

What are Qt 5 Signals and Slots?

Very basically, signals and slots in Qt allow communication between objects.

In Qt, a signal is emitted when an event occurs. A slot is a function that is called when a signal is emitted. For example, a push button emits a clicked signal when clicked by a user. A slot that is attached to that signal is called when the clicked signal is emitted.

Multiple signals can be connected to any slot. Signals can be connected to any number of slots.

Most of the details of signals and slots are hidden in their implementation in Qt. At this stage of the tutorial series we do not look in depth at signals and slots.

Qt Slot Sender Cast

Using Signals and Slots in Qt Creator

There are several ways to use signals and slots in Qt Creator projects. This includes manually adding them in code. Here we briefly look at the easier ways to use signals and slots to respond to events. Events are generated by users interacting with widgets in an application. These events cause signals to be emitted. Corresponding slots, or functions then run.

Qt 5 Signals and Slots Demonstration

The following image shows the application built in this section using Qt Creator. It demonstrates some methods of using signals and slots.

Each section below shows a method of adding signals and slots to a Qt Creator program. Watch the video embedded near the top of this page for details.

Add a Slot to a Button for the Clicked Signal

Place a push button on the main window. Right click the push button and select Go to slot… to add code for the clicked signal.

Connect a Slider to a Progress Bar Visually

Place a Horizontal Slider and a Progress Bar on the main window.

Press F4 on the keyboard. This toggles to Edit Signals/Slots mode.

Drag to connect the slider to the progress bar.

Press F3 to change back to Edit Widgets mode.

Connect a Slider to a Progress Bar with Code

Place a second Horizontal Slider and a Progress Bar on the main window.

Right-click the Horizontal Slider. In the menu that pops up, click Go to slot…

In the dialog box that pops up, select sliderMoved(int). Click the OK button.

Add code for the sliderMoved signal.

Menu Bar Item with Action Editor

Add a File menu with Open, Close and Quit menu items.

Qt Creator must be in Design mode. Make sure that the Action Editor and Signal and Slots Editor are visible. Do this from the top menu as follows. Select Window → Views and then click the check box next to each of the desired editors.

Add slots for the triggered() signal for the Open and Close menu items. Do this in the Action Editor as follows. Right click a menu item. Click Go to slot… on the menu that pops up. Click triggered() in the dialog box that pops up and then click the OK button.

Add code in the slot function.

Menu Bar Item with Signals and Slots Editor

In Design mode, select the Signals and Slots tab. Click the big green + sign to add an item. Change the following for the new item.

• Sender : actionQuit
• Signal : triggered()
• Receiver : MainWindow
• Slot : close()

Qt Signal Macro

Code Listing

Qt Signal Sender

Below is the code listing for mainwindow.cpp for the example project. Follow the video embedded near the top of this page to add the code.

Qt Signal And Slots

mainwindow.cpp